SupaRule 190

Used by Utilities and Government Offices worldwide for the measurement of cable height.

• By eliminating cable contact and the use of heavy fibreglass poles this is the safest method for cable height measurement.
• Will also measure to the top of lighting columns.
• Make sure that your lighting engineers are:
• - Working at safe distances from live cables.
• - Installing cables to the correct height.
• - Ensuring public safety by monitoring cable heights above roads and footpaths.
• All capable of measuring the lowest wire or cable.
• Pre-selectable start-up in metric or feet and inches.
• Air temperature constantly displayed (LCD).
• Final measurement includes instrument depth.
• 9V battery for over 50000 measurements.
• Resolution: 1/8 Inch or 1mm.
• Error typically less than 0.1% ± 1 digit.
• Auto power-off time 3 minutes.
• Can be mounted on a Monopod for speed.
• Range (25mm cable min): 1-15m (3-50ft)
• Range (12mm cable min): 1-15m (3-50ft)
• Range (5.5mm cable min): 1-12m (3-40ft)
• Range (2.5mm cable min): 1-10m (3-33ft)
• No. of wires measured: 1
• Accuracy: 0.5% ±2 digits
• Resolution (range < 10m): 5mm
• Resolution (range > 10m): 10mm
• Minimum gap between wires: 150mm
• Operating temperature range: -10°C to 40°C
• Battery life (long life alkaline type): 50,000 measurements
• Measurement units: Imperial (feet/inches) or Metric (metres)
• Auto power off delay: 3 minutes
• Dimensions: 205mm x 100mm x 70mm
• Weight: 0.5kg