Introduction to Trimble Business Center
A three-day course covering a typical topographic land survey data processing workflow within Trimble Business Center. Those attending this course will learn how to bring a variety of survey data into TBC, check the raw data and process it. Bowditch and least-squares traverse adjustment is covered for the creation of control points. GNSS baseline processing […]
Introduction to Topographic Surveying
A Trimble Robotic Total Station is used as the primary survey device on this three-day course designed to introduce the novice to basic topographic survey procedures. The course begins by introducing some basic survey principles and the Robotic Total Station. Stationing methods are practised, from which a number of exercises develop the topographic survey method. […]
GEOSCHOOL
KOREC GEOSCHOOL is our on-line learning platform that offers a range of paid for and free of charge high quality training courses. These courses have all been designed to allow you to choose, where, when and at what pace you’d like to complete your training as well as providing lots of opportunity for questions and […]
Rail Data Preparation for Machine Control
Overview This training course uses Trimble Business Center software to teach the complete process of preparing Trimble machine control ready surfaces from rail design files. The corridor functionality is used to take imported alignments and create Ballast and Formation surfaces through the insertion of template instructions to follow the information given on the General Arrangement […]
Trimble Access for Site Engineers – Setting Out Essentials
Course Contents Transfer setting out data to a Controller and use inside Trimble Access Setup a Total Station using a Resection stationing method Setup a Total Station on a point with known coordinate and orient to an angle or coordinate Select correct prism types, constants and tracking methods Correctly measure retro targets in reflectorless mode […]
Trimble Access for Site Engineers – Advanced (includes GNSS site setup)
Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup […]
Introduction to Land Surveying – Short Course
Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on […]
Introduction to Land Surveying – Short Course August 2023
Course Contents Setup a Total Station and measure rounds of angles Observe a traverse survey Process and adjust traverse survey Save Control coordinates to a CSV file and transfer to field software Perform known point and resection station setups Select correct prism types, constants and tracking methods Conduct a topographic survey using correct field coding […]
Survey Technology for Construction Colleges
Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual […]
Survey Technology for Construction Colleges Nov 2023
UAS (drone) Ground Control Point Collection Using a Low Cost GNSS Receiver – Trimble Catalyst
Course Contents Key GNSS fundamentals and data correction services OS National Grid and coordinate types Ground Control Point software options Ground Control Point location, distribution and measurement including fieldwork Ground Control Point coordinate export Import of Ground Control Points into Pix4D Course Details This is a 1/2 day course at our Huntingdon training facility at […]
UAS (drone) Ground Control Point Collection Using a Low Cost GNSS Receiver – Trimble Catalyst June & November
Structure Monitoring using Trimble Access & Trimble Business Center
Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at […]
Setting Out Roads using Trimble Access & Trimble Business Center
Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England […]
Trimble Business Center – EarthWorks Basics
Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section […]
Trimble Business Center – EarthWorks Advanced
Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is […]
Introduction to Land Surveying- Short Course
GNSS Survey and Data Processing Course – Liverpool
GNSS Survey and Data Processing Course – Liverpool 2 Day Course: The GNSS background session provides a comprehensive theoretical foundation for a training course on GNSS (Global Navigation Satellite System) technologies. It covers the critical aspects of how GNSS systems like GPS, GLONASS, Galileo, and BeiDou function to provide global positioning capabilities. The course explains […]
GNSS Survey and Data Processing Course
GNSS Survey and Data Processing Course 2 Day Course: The GNSS background session provides a comprehensive theoretical foundation for a training course on GNSS (Global Navigation Satellite System) technologies. It covers the critical aspects of how GNSS systems like GPS, GLONASS, Galileo, and BeiDou function to provide global positioning capabilities. The course explains the importance […]
GNSS/GPS Surveying & Setting-out course – Ireland
KOREC Ireland are delighted to announce our new GNSS Surveying & Setting-out course! Based on years of training experience this course has been designed to cover the essentials of surveying and setting-out for site engineers using GNSS. An introductory course it is open to all with no previous experience necessary. This course has been accredited […]
GNSS/GPS Surveying & Setting-out course – Ireland October
GNSS/GPS Surveying & Setting-out course – Ireland December
GNSS/GPS Surveying & Setting-out course – Ireland November Copy
Total Station Surveying & Setting-out course
KOREC Group Ireland are delighted to announce our new Total Station Surveying & Setting-out course! Based on years of training experience this course has been designed to cover the essentials of surveying and setting-out for site engineers using Trimble Total Station’s. This 1- day course will also cover the best procedures for station setups, resections […]