KOREC Courses Calendar

< 2024 >

December

Mon	Tue	Wed	Thu	Fri	Sat	Sun
November	November	November	November	November	November	1 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 01/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 01/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 01/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 01/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 01/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 01/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 01/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 01/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 01/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 01/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 01/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 01/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 01/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 01/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 01/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 01/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility
2 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 02/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 02/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 02/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 02/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 02/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 02/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 02/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 02/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 02/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 02/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 02/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 02/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 02/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 02/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 02/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 02/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	3 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 03/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 03/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 03/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 03/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 03/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 03/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 03/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 03/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 03/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 03/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 03/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 03/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 03/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 03/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 03/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 03/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	4 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 04/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 04/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 04/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 04/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 04/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 04/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 04/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 04/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 04/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 04/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 04/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 04/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 04/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 04/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 04/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 04/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	5 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 05/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 05/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 05/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 05/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 05/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 05/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 05/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 05/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 05/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 05/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 05/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 05/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 05/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 05/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 05/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 05/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	6 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 06/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 06/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 06/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 06/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 06/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 06/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 06/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 06/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 06/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 06/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 06/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 06/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 06/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 06/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 06/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 06/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	7 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 07/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 07/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 07/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 07/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 07/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 07/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 07/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 07/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 07/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 07/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 07/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 07/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 07/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 07/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 07/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 07/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	8 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 08/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 08/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 08/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 08/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 08/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 08/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 08/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 08/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 08/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 08/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 08/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 08/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 08/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 08/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 08/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 08/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility
9 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 09/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 09/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 09/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 09/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 09/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 09/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 09/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 09/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 09/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 09/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 09/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 09/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 09/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 09/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 09/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 09/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	10 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 10/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 10/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 10/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 10/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 10/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 10/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 10/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 10/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 10/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 10/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 10/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 10/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 10/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 10/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 10/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 10/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	11 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 11/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 11/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 11/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 11/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 11/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 11/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 11/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 11/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 11/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 11/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 11/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 11/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 11/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 11/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 11/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 11/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	12 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 12/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 12/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 12/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 12/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 12/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 12/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 12/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 12/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 12/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 12/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 12/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 12/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 12/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 12/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 12/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 12/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	13 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 13/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 13/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 13/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 13/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 13/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 13/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 13/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 13/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 13/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 13/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 13/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 13/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 13/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 13/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 13/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 13/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	14 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 14/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 14/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 14/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 14/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 14/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 14/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 14/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 14/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 14/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 14/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 14/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 14/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 14/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 14/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 14/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 14/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	15 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 15/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 15/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 15/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 15/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 15/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 15/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 15/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 15/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 15/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 15/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 15/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 15/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 15/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 15/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 15/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 15/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility
16 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 16/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 16/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 16/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 16/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 16/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 16/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 16/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 16/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 16/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 16/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 16/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 16/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 16/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 16/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 16/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 16/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	17 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 17/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 17/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 17/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 17/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 17/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 17/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 17/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 17/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 17/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 17/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 17/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 17/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 17/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 17/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 17/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 17/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	18 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 18/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 18/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 18/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 18/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 18/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 18/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 18/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 18/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 18/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 18/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 18/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 18/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 18/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 18/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 18/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 18/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	19 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 19/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 19/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 19/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 19/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 19/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 19/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 19/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 19/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 19/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 19/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 19/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 19/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 19/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 19/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 19/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers - Advanced (includes GNSS site setup) Trimble Access for Site Engineers - Advanced (includes GNSS site setup) All day 19/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility	20 Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 20/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center – EarthWorks Advanced Trimble Business Center – EarthWorks Advanced All day 20/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center – EarthWorks Basics Trimble Business Center – EarthWorks Basics All day 20/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 20/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 20/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 20/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying – Short Course Introduction to Land Surveying – Short Course All day 20/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: Key surveying instrument used throughout the course. Trimble Access: Software for data collection and initial processing. Trimble Business Centre: Software for comprehensive data analysis and project management. By the end of this course, participants will be well-equipped to carry out small survey projects independently, applying best practices and utilizing the full capabilities of Trimble technology to achieve precise and reliable survey results. Course Details This is a 2-day course at our Liverpool training facility Trimble Access for Site Engineers – Advanced (includes GNSS site setup) Trimble Access for Site Engineers – Advanced (includes GNSS site setup) All day 20/12/2024-31/12/2024 Course Contents Carry out field-based instrument checks and calibration (Total Station) Configure Controller short cut keys Measure points on a grid pattern Measure and compute a volume for a stockpile or depression Basic Total Station point scanning Verticality check columns or walls Point checks to a BIM model Generate a Setting Out QC report Setup a GNSS Base Receiver Perform a GNSS Site Calibration Share a Site Calibration Relocate a GNSS Base Receiver Data transfer via the Internet (Trimble Connect) Correct usage of coordinate systems (e.g. OS National Grid, HS2 Grid, Highways England, etc) Create Trimble Access Templates Course Details This is a 1-day course at our Liverpool training facility More events Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 20/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Trimble Business Center - EarthWorks Advanced Trimble Business Center - EarthWorks Advanced All day 20/12/2024-31/12/2024 Course Contents Elevating 2D data Georeferencing and extracting elevation data from PDF documents Managing Layers Resolving overlying strings Intersecting slopes with a surface model Merging and combining surface models Creating and exporting cross-sections Advanced volume reporting Exporting surfaces and associated data to Trimble Machine Control files Projected surfaces Introduction to Site Take-off reporting This is a 1-day course at our Huntingdon training facility Trimble Business Center - EarthWorks Basics Trimble Business Center - EarthWorks Basics All day 20/12/2024-31/12/2024 Course Contents Interface layout Design data formats and import Creating surfaces Adding and removing surface members Add breaklines and boundaries Surface properties, triangle and edge editing Surface shading, textures and colour mapping Review surface in a 3D view Surface Slicer view Create a surface grid Offset a surface Create contours Cut/Fill map generation Quick Section creation Volume reporting Course Details This is a 1-day course at our Huntingdon training facility Setting Out Roads using Trimble Access & Trimble Business Center Setting Out Roads using Trimble Access & Trimble Business Center All day 20/12/2024-31/12/2024 Course Contents Design data challenges, formats and recommendations Reviewing design data in Trimble Access and Trimble Business Center Trimble Access Roads Module overview Set out from a road design: points, lines and offsets from lines, slope boards and profile boards Vertical offsets Working with Plan and Cross-Section views Coordinate systems: OS National Grid, Highways England and Site Calibrations Using Trimble Business Center to create subgrade DTM models Course Details This is a 1-day course at our Liverpool training facility Structure Monitoring using Trimble Access & Trimble Business Center Structure Monitoring using Trimble Access & Trimble Business Center All day 20/12/2024-31/12/2024 Course Contents Trimble Access Monitoring module overview Total Station positioning and options Prism types and fixings Trimble Access Monitoring module data collection fieldwork Controller and desktop PC report generation Advanced reporting using Trimble Business Center Other data sources Trimble 4D Control Monitoring system overview and case studies Course Details This is a 1-day course at our Huntingdon training facility Survey Technology for Construction Colleges Survey Technology for Construction Colleges All day 20/12/2024-31/12/2024 Course Contents Current Trimble systems overview Field based survey and setting out practice with Total Station based Trimble Ri AR10 Mixed reality technology for inspecting BIM data in field and classroom environments SiteVision Augmented reality for visualising design data in a field context Laser scanning for design data checks and clash detection Classroom based virtual teaching environment for Total Station and GNSS setting out and measuring site workflows Robotic based laser scanning Course Details This is a 1-day course at our Huntingdon training facility Introduction to Land Surveying - Short Course Introduction to Land Surveying - Short Course All day 20/12/2024-31/12/2024 Course Overview This comprehensive training course is designed for assistant or junior surveyors who are beginning to conduct their own small surveys and seek to enhance their theoretical knowledge and practical skills in site surveying. Focusing on the use of the Trimble Total Station, the course offers a balanced mix of classroom-based theory and hands-on field sessions. Learning Objectives Understand the principles of site surveying. Gain practical skills in using a Trimble Total Station. Learn best practices in conducting surveys. Utilise Trimble Access and Trimble Business Centre software to manage survey projects from start to finish. Course Structure Introduction to Site Surveying Overview of site surveying principles. Importance of accuracy and precision in surveying. Using Trimble Total Station Detailed instruction on the setup and operation of the Trimble total station. Practical exercises in data collection and equipment handling. Field Sessions Hands-on practice in conducting surveys in a real-world setting. Application of theoretical knowledge to practical scenarios. Trimble Access Introduction to Trimble Access software. Data collection, management, and preliminary analysis. Trimble Business Centre Comprehensive training on Trimble Business Centre. Advanced data processing, analysis, and visualization techniques. Integrating and finalizing survey data. Best Practices in Surveying Tips and guidelines for conducting efficient and accurate surveys. Troubleshooting common issues and challenges in the field. Training Methodology The course employs a blend of instructional methods to ensure a thorough understanding and practical application of the content. Participants will benefit from interactive classroom sessions, detailed software tutorials, and extensive field practice to solidify their skills. Target Audience This course is ideal for assistant or junior surveyors who are looking to gain a solid foundation in site surveying and are ready to take on more responsibility in their survey projects. Tools and Software Trimble Total Station: