The Protimeter Moisture Measurement System (MMS) is a complete moisture measurement device for use in many different building related industries. The MMS combines pin type and non-invasive modes of measurement together with a thermo-hygrometer in one state-of-the-art instrument. The instrument is compact and simple to use, having a large liquid crystal display and a cluster of just four buttons for selecting the operational modes.
When used as a moisture meter, the MMS Plus has two operational modes known as Search and Measure. By selecting Search mode and holding the instrument against building materials such as walls, the user obtains a qualitative indication of the moisture level beneath the surface or under a floor covering. By selecting Measure mode and using the standard pin or 5" deep wall probes to gather further information at the surface and up to 5" in depth below the surface. The Hygrometer function can measure relative humidity, ambient temperature and dew point. Moisture conditions of domestic and commercial environments can be assessed and compared. Also can confirm the presence of condensation on surfaces. One-year parts and labour warranty.
The Hygrostick® sensor that is supplied with the instrument 4 can also be embedded in solid floors and walls to obtain a material's equilibrium relative humidity (ERH) value making it ideal for concrete applications. This technique has been widely adopted by the flooring industry (ASTM Standard F-2170-02) to establish if concret floors have dried sufficiently prior to laying a floor covering. |
Ideal for Fire and flood restoration, Concrete floor moisture measurement, Indoor air quality, Environmental health
Measuring moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry, wall cavity insulation, and other building materials.
Searching behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
Hygrometry checks the dehumidification process and monitors buildings for adequate ventilation affecting indoor air quality. |
Kit includes Hygrostick (Range 30-100%), Surface temperature sensor (BLD5804), 5" (127 mm) insulated deep wall probes (BLD5018), Pin moisture probe and hygrostick lead (BLD5060), Calibration check device (BLD5086), Hygrostick/Humistick ext. lead, 30" (76cm) (BLD5802), Instructions, nylon zipper pouch, Wood species calibration table.
BLD5800LH Kit includes standard kit, data download software with cable (BLD5810). |
