 |
Product Search
|
 |
|
|
 |
|
KOREC Direct - Construction And Surveying Supplies > Offers > Endofline
|
 |
Pro-Line Series tapes are made with none woven PVC-coated fibreglass of superior durability. Markings are not affected by casual contact with alcohol, brine, paint thinner, gasoline or similar fluid. PVC face will not collect dust or mildew and stains wash off with soap and water.
Open reels feature new reinforced, rounded design and large rubber grip handle.
|
 |
| 30m Chalkline with rewind |
 |
| With the Winkelfix, measurements of angles are performed quickly and precisely. Simply place the Winkelfix in position and the angle is rapidly and accurately shown in degrees in the analogue display. Two integral spirit levels ensure true horizontal and vertical positioning. Degrees can be immediately viewed. |
 |
| BMI Basic Range is are professional quality open frame steel tapes. |
 |
| Bubble Level for Leica Disto Classic |
 |
| Eurostar Spirit Level 900mm/36" with 2 vials is a robust and accurate spirit level with a 30 year guarantee |
 |
| ProShot R6 Sensor and Clamp |
 |
Ideal for inspection purposes, this 3.6m Ladder can be easily carried and stored in the boot of a car.
Manufactured from hollow seamless extrusions with radiused corners for extra strength. Rungs of 24mm diameter serrated tubing fitted at a standard rise of 229mm by a special locking method to prevent turning and for increased strength. Overall width 323mm. Ends of ladder stiles fitted with rubber plugs.
more... |
 |
| SONIN Electronic Distance Measuring Tools send out narrow beams of sound waves that "bounce" off solid objects back to the hand-held receiver. Custom electronics and a microprocessor then convert elapsed time into a distance measurement and display it on the LCD. |
|
| The Spectra Precision® Laser HR250 for the Spectra Precision Laser LL200 and LG20 model lasers is an excellent receiver for contractors doing interior and exterior construction work. The easy-to-see, simultaneous front/back LCD displays with front LEDs with green on-grade display make the HR250 ideal for general construction leveling and aligning applications. The HR250 receiver attaches easily to the grade rod and allows you to easily read elevation changes across your work area. With a tough composite material housing, the HR250 withstands a drop of up to 1.5 meters (5 feet) to a hard surface. |
 |
Stanley Chalk Refill White 113 Gram
Powdered chalk in container with easy pouring spout.
For use in chalk reels.
Colour. White |
 |
Pro-Line Series tapes are made with nonwoven PVC-coated fiberglass of superior durability. Markings are not affected by casual contact with alcohol, brine, paint thinner, gasoline or similar fluid. PVC face will not collect dust or mildew and stains wash off with soap and water.
Open reels feature new reinforced, rounded design and large rubber grip handle. |
 |
| Digital Callipers, to take measurement inside and outside and depth too. 150mm /6 inches measuring capability. |
 |
| Ideal for use in noisy environments, for example,. warehousing or farming. The unit can be attached to a belt or garment with the aid of an integrated clip. |
 |
ProShot L1-AS Automatic Slope Laser is a servo levelled slope laser with grade capability of 0-25.00% (NEW) in increments of 0.01%.
The L1-AS is for the large grading or underground capability who needs long range, slope, and accuracy. The L1-AS can also shoot compound grades when paired with the optional S1 Adapter. Use with receiver. 3 Year Guardian Warranty.
more... |
 |
The MC-1 is a self-contained laser receiver and visual display that is designed for use on a backhoe or trencher. It enables the machine operator to take elevation readings from the control seat. The electronics are housed in a heavy-duty aluminium extrusion, and provide 8 inches (205mm) of receiving height in a 120-degree arc.
The bright LED grade display can be seen at a distance, and provides 5 channels of information, high, high fine, on grade, low fine, and low. Controls consist of an on/off switch, and a switch to control the brightness of the LED display.
more... |
 |
Single Horizontal Beam laser liner. The unit generates a laser line single beam out directly infront of the laser which runs almost 90 degrees upwards.
Requires 2 x AAA Batteries |
|
Stanley Chalk Refill Blue 113 Gram
Powdered chalk in container with easy pouring spout.
For use in chalk reels.
Colour. Blue. |
 |
| The Handheld Rotating Velocity Volume Vane Thermo Anemometer features a fixed flow-temperature vane to measure air velocity, volume flow and temperature. Designed for single-handed operation. The unit has a built in vane. |
 |
| A high specification extra heavy duty spirit level of high accuracy with a tough, heavy duty profile designed for maximum strength whilst being reasonably weighted for ease of use. |
 |
| Garmin SP12 Data Cable 010-10086-00. For use with the Garmin GPS12 |
 |
| Spare Rechargeable battery for the XTN446 |
 |
ProShot L1-AS Automatic Slope Laser is a servo levelled slope laser with grade capability of 0-25.00% (NEW) in increments of 0.01%.
The L1-AS is for the large grading or underground capability who needs long range, slope, and accuracy. The L1-AS can also shoot compound grades when paired with the optional S1 Adapter. Use with receiver. 3 Year Guardian Warranty.
more... |
 |
ProShot L4+ HV Semi Automatic Visible Laser is a self-leveling compensated visible laser with manually plumbed vertical capability. The L4+ is ideal for commercial interior and drop ceiling contractors or for long-range exterior work (2000' diameter with R7 receiver). It features the same high accuracy as the L4, but can be used visually indoors. Use visually indoors or with receiver outdoors. The L4+ is a top choice for commercial ceiling, drywall, and interior contractors. It is also an excellent choice for long-range exterior work when paired with the R7 receiver. It functions in the same manner as the L4, but it sports a high power visible beam and a fixed plumb beam. Like the L4, the L4+ self levels via a wire hung compensator, and is manually plumbed and aligned in the vertical mode. The fixed plumb beam is useful for transferring points from floor to ceiling (used with the P1 Plumb Plate), or for turning 90-degree angles.
For outdoor work, the L4+ must be used with the optional R7 laser receiver. Review the market for self-levelling visible beam lasers and you will conclude that the L4+ sets new standards for performance and affordability. |
 |
| ProShot VM2 Clamp - VM2 mount lets you setup to project a vertical plane for alignment, or use the 90-degree plumb beam and the vertical plane as a square reference for layout work. Mount it to a tripod, or attach it to a wall for use as a basic ceiling or soft fit mount. Vertical mode adapter for use with L4+, L5 or L3 Lasers. |
 |
| The MeasureMeter is the perfect tool for indoor use, with a large display, retractable stand and telescopic handle. Fitted with a circumference wheel, adding forward and subtracting in reverse. |
 |
| Garmin Data cable (extrex to pc) 010-10226-04 |
 |
| Target plate A4 (210 x 297mm). Double sided: white for shorter distances to 30m and grey one for longer distances up to 200m. |
 |
| ProShot CB Ceiling Bracket - CB Ceiling Bracket for VM2 or W1 |
 |
| The ProShot L6 Fully Automatic Self Levelling Visible Beam Laser delivers a highly visible rotating beam and plumb spot designed for interior applications such as suspended ceilings, walls, tiling courses, drywall, partitions, soft fits, and layout work. It provides servo motor automatic horizontal levelling and vertical plumb. The variable speed-rotating beam can also be stopped or set to scan in a selectable arc of 0-90 degrees. The optional remote control allows control of rotation and scan modes, and alignment in the vertical mode up to 100 feet from the laser. You can also manually tilt the rotating plane in one or both axis to match existing heights. The L6 can be paired with an optional receiver for outdoor work. |
|
| 256Mb Data Card for Street Pilot III Deluxe 010-10226-04 |
 |
| Spare Bezel covers in Black and Yellow, to allow |
 |
Quante QL250DI H/V Internal Laser. These German manufactured lasers are extremely rugged.
Fully automatic waterproof, visible beam, horizontal/vertical laser. (+/- 10 seconds, 300m diameter) |
 |
| The CST Pro Line Series is an indispensable measuring tool designed for the precision-minded user. Open reels feature new rubber reinforced, rounded design, large soft rubber grip handle, 13mm blade width. |
 |
| Battery Covers (also known as End Caps) |
 |
| The MG-1 is a Magnetic Clamp for the MC-1 Machine Control Laser |
 |
| Richter Open Framed Series fibreglass robust measuring tape. |
 |
| Spectra Carry Case for Spectra LL600 Laser (also known as 1044-4791S) |
 |
| Battery Covers (also known as End Caps) |
 |
The ProShot L3 Manual Laser is a visible beam rotary laser for the professional homebuilder, remodelling contractor, or landscape contractor who prefers a manually levelled product. Horizontal, vertical, and slope modes. It features a highly visible red beam along with a plumb spot emitted from the top of the laser. Use visually indoors or with optional receiver outdoors. One-Year Warranty.
The L3 is aimed at the professional homebuilder, room addition contractor, or tenant improvement contractor who wants a manually levelled and plumbed laser. The L3 features a highly visible red rotating beam, along with a plumb spot. The plumb spot can be used to transfer points from floor to ceiling, and will provide a 90-degree reference when the laser is in its vertical mode. Additionally, the L3 features a level vial with markings for 1-4% slope. |
 |
| ProShot P1 Plumb Plate for L4+ - The plate enables one to position the L4+ laser over a point on the floor, so that its plumb beam can transfer that point above to the ceiling. |
 |
| Spectra Carry Case for use with HV601 |
|
| Trumeter Carry Case for Road Wheel & MeasureMeter |
 |
| Battery Covers (also known as End Caps) |
 |
| GasAlertMicro 5 PID Five-Gas Detector - VOCs (PID), H2S, CO, O2, SO2, PH3, NH3,NO2, HCN, Cl2, ClO2, O3, and Combustibles |
 |
| ProShot W1 Wall/Vertical Mount - The W1 is designed to clip to the wall angle on drop ceiling jobs, or is used to lay the lasers down into the vertical mode. In vertical mode, the W1 can be set on the floor, or threaded onto a tripod. (The L2, L2+, L4, L4+, and L1-AS lasers can all be used in the vertical mode.) |
 |
| Battery Covers (also known as End Caps) |
 |
| ProShot MT-1 Magnetic Mount - The MT1 target magnetically attaches to drop ceiling grids, and can be used with any visible beam-rotating laser. |
 |
| The CST Pro Line Series is an indispensable measuring tool designed for the precision-minded user. Open reels feature new rubber reinforced, rounded design, large soft rubber grip handle, 13mm blade width. |
 |
| Battery Covers (also known as End Caps) |
 |
| The ProShot L6 Fully Automatic Self Levelling Visible Beam Laser delivers a highly visible rotating beam and plumb spot designed for interior applications such as suspended ceilings, walls, tiling courses, drywall, partitions, soft fits, and layout work. It provides servo motor automatic horizontal levelling and vertical plumb. The variable speed-rotating beam can also be stopped or set to scan in a selectable arc of 0-90 degrees. The optional remote control allows control of rotation and scan modes, and alignment in the vertical mode up to 100 feet from the laser. You can also manually tilt the rotating plane in one or both axis to match existing heights. The L6 can be paired with an optional receiver for outdoor work. |
 |
| The S1 Slope Adapter allows the L1-AS lasers to shoot dual slope situations. A chart tells the user what slope to dial into the laser, and the S1 adapter allows the user to precisely rotate the laser so that the x and y axis end up at the desired slopes. |
 |
| Battery Covers (also known as End Caps) |
 |
Pro-Line Series tapes are made with nonwoven PVC-coated fiberglass of superior durability. Markings are not affected by casual contact with alcohol, brine, paint thinner, gasoline or similar fluid. PVC face will not collect dust or mildew and stains wash off with soap and water.
Open reels feature new reinforced, rounded design and large rubber grip handle. |
 |
| The CST Pro Line Series is an indispensable measuring tool designed for the precision-minded user. Open reels feature new rubber reinforced, rounded design, large soft rubber grip handle, 13mm blade width. |
 |
| Manual Levelling Rotating Laser Level |
 |
| ProShot B53 Charger - 2D Rechargeable NiMH batteries and charger, provide at least 40 hrs continuous run time with L3, L5, and L6 lasers. |
|
The MC-1 is a self-contained laser receiver and visual display that is designed for use on a backhoe or trencher. It enables the machine operator to take elevation readings from the control seat. The electronics are housed in a heavy-duty aluminium extrusion, and provide 8 inches (205mm) of receiving height in a 120-degree arc.
The bright LED grade display can be seen at a distance, and provides 5 channels of information, high, high fine, on grade, low fine, and low. Controls consist of an on/off switch, and a switch to control the brightness of the LED display.
more... |
 |
The automatic self-leveling Spectra Precision Laser 1452GC is an economical laser with the versatility to handle all types of horizontal construction leveling applications. In manual mode, it can also be used for sloping and vertical applications. The waterproof housing of the 1452GC ensures maximum productivity anytime, anywhere. The complete package includes the laser, HR550 hand held receiver, general purpose clamp, operator's manual, battery recharger and carrying case.
The 1452GC transmitter sends a continuous, self-leveled 360-degree laser reference over your entire work area, up to a 300m (1,000ft) diameter. Allowing you to work longer from each setup with greater accuracy, the 1452GC's automatic self-leveling provides quick and easy error-free setups. Just press the power button and go to work! |
 |
The S-501 is a multi-functional laser chalk line ideal for tasks such as fitting floors and wall ties, setting out partitions, installing windows and doors. This easy-to-use tool is perfect for builders, carpenters, plumbers, shop fitters, etc as a quick and cost effective solution.
By using the remote control on the S501 you can guide the instrument Left or Right in the Horizontal plane to line up the Vertical beams. |
|
| Hanging Wall Bracket for S401 Laser Chalkline Kit |
 |
| The EziCAT Digital Locator has been designed to meet the stringent and ever more complex requirements of today’s tracing operations. Several vital safety features built into the EziCAT are rarely found in similarly priced units from other manufacturers. |
|
| EziCAT Bag to fit any Cable Locator and Generator |
 |
| The EziROD is a non-metal service tracer by pushing the rod into the pipe, connected to the DIGITRACE. |
|
| Shopping Basket
| |
|
|
|
